Rotkee vs. Pico

More
3 years 1 month ago #47204 by diamond84
Replied by diamond84 on topic Rotkee vs. Pico
I've got the rotkee scope in the uk and most of their attachments, i must say, its pretty good. the leads are good quality. software took some time to get use to, but had very good advanced features.
The following user(s) said Thank You: cadman777

Please Log in or Create an account to join the conversation.

More
3 years 1 month ago #47211 by stevieturbo
Replied by stevieturbo on topic Rotkee vs. Pico
Would it be worth a new thread exclusively to the workings of it ?

Have you found any obvious limitations ?

Please Log in or Create an account to join the conversation.

More
3 years 1 month ago #47232 by Tyler
Replied by Tyler on topic Rotkee vs. Pico
Finally got my scope ordered. :woohoo:

Please Log in or Create an account to join the conversation.

More
3 years 1 month ago #47242 by diamond84
Replied by diamond84 on topic Rotkee vs. Pico
It blows my old hantek out the water, still getting used to all the functions. im still learning scope diagnosis. rotkee have a library too.

Please Log in or Create an account to join the conversation.

More
3 years 1 month ago #47243 by Tutti57
Replied by Tutti57 on topic Re:Rotkee vs. Pico
Hmm, I was checking out their site last night. Accessories are very inexpensive too, unless I missed some monetary conversion button.

Sent from my moto g fast using Tapatalk

Please Log in or Create an account to join the conversation.

More
3 years 1 month ago #47244 by stevieturbo
Replied by stevieturbo on topic Re:Rotkee vs. Pico
Yep, all quite cheap.

Although I guess it's relative. We see cheap.....or is it everywhere else is overpriced ?

Still no further communication from them, other than an email 10 days or so to confirm payment received.

Must email them to see if it has shipped yet.

Please Log in or Create an account to join the conversation.

More
3 years 1 month ago #47246 by Wightscope
Replied by Wightscope on topic Re:Rotkee vs. Pico
I did get an email to say my few parts had shipped a few days after payment.

Please Log in or Create an account to join the conversation.

More
3 years 1 month ago #47315 by AJeep18
Replied by AJeep18 on topic Re:Rotkee vs. Pico
I ordered some 6ft Banana back probing leads a couple of weeks ago and got them in the mail today. Seem ok. The wire is speaker cable though... no too impressed by that. I like that the tips are flexible. Eagerly awaiting your review of the scope Tyler!

Please Log in or Create an account to join the conversation.

More
3 years 1 month ago - 3 years 1 month ago #47316 by AJeep18
Replied by AJeep18 on topic Re:Rotkee vs. Pico
Here is what the look like [attachment=9086]
Last edit: 3 years 1 month ago by AJeep18. Reason: double posted pictures

Please Log in or Create an account to join the conversation.

More
3 years 1 month ago #47317 by stevieturbo
Replied by stevieturbo on topic Re:Rotkee vs. Pico
Hmmmm....still no reply from them about my order, or any information about it.

I am getting a little concerned

Please Log in or Create an account to join the conversation.

More
3 years 1 month ago #47320 by AJeep18
Replied by AJeep18 on topic Re:Rotkee vs. Pico

Tutti57 wrote: Hmm, I was checking out their site last night. Accessories are very inexpensive too, unless I missed some monetary conversion button.


They are fairly cheap but after you use TransferWise and pay shipping not quite as cheap as what you see on the website. The long back probing leads I ordered were listed at $9 but ended up being about $23 when all was said and done
The following user(s) said Thank You: cadman777

Please Log in or Create an account to join the conversation.

More
3 years 1 month ago #47323 by diamond84
Replied by diamond84 on topic Re:Rotkee vs. Pico
makes it worth it when you buy more items

Please Log in or Create an account to join the conversation.

More
3 years 1 month ago #47325 by stevieturbo
Replied by stevieturbo on topic Re:Rotkee vs. Pico
That's why ordered a decent amount. Makes no sense buying one or two small items

Please Log in or Create an account to join the conversation.

More
3 years 1 month ago - 3 years 1 month ago #47390 by cadman777
Replied by cadman777 on topic Rotkee vs. Pico
Nice!
I'm on the verge of getting one too...
Last edit: 3 years 1 month ago by cadman777.

Please Log in or Create an account to join the conversation.

More
3 years 1 month ago #47392 by stevieturbo
Replied by stevieturbo on topic Rotkee vs. Pico
Still no response from them ! Payment received 25 Feb....haven't heard a thing since.

I've emailed them again for an update.

Please Log in or Create an account to join the conversation.

More
3 years 1 month ago #47432 by Tyler
Replied by Tyler on topic Rotkee vs. Pico

stevieturbo wrote: Still no response from them ! Payment received 25 Feb....haven't heard a thing since.

I've emailed them again for an update.


Same. :angry:

Please Log in or Create an account to join the conversation.

More
3 years 1 month ago #47469 by Paul P.
Replied by Paul P. on topic Rotkee vs. Pico
Hey fellas,

I ordered a PS16 and the fittings to go with it. (Very impressed with it btw!) I live in Ontario, it took 6 weeks to get here from Kyiv.

I don't think Eugene checks emails on the weekend. I had zero problems with him!!!

I've played with the scope software, I like the stacked mode for secondary, ( I wish Pico could do this ). But it does seem they really limit you to their selection of probes for their scope, which of course is alright, but for those of us that like to mix and match and get the best of all worlds, it's limited.

Hang in there the merchandise will come!!

Never stop Learning.

Please Log in or Create an account to join the conversation.

More
3 years 1 month ago #47473 by AJeep18
Replied by AJeep18 on topic Rotkee vs. Pico
Yeah I'm not really sure why you guys are having issues... it took about a month to come to me in the US and I got a tracking number right away.

Please Log in or Create an account to join the conversation.

More
3 years 1 month ago - 3 years 1 month ago #47476 by VladimirPostolovsky
Replied by VladimirPostolovsky on topic Rotkee vs. Pico
Hello,
The concept of implementing automatic processing of automotive signals was started in 2007 by Andrew Shulgin.


All of our developments have been published in various automotive magazines:
March 20, 2012 - Service Solutions: The ‘CKP’ Script - Underhood Service
March 4, 2015 - The Right Diagnostic Tools Save You From Extensive Disassembly Time - TechShop
February 22, 2016 - Using the CSS Script for Unconventional Diagnostic Methods - TechShop
March 1, 2017 - Maximizing Tools: Using Software to Aid in Engine Mechanical and Electronic Failure Diagnosis - TechShop

Leading automotive forums should refrain from discussing the use of pirated software taken from us and used in other devices.

Andrew Shulgin's explanation

Unfortunately, due to the pirating of our software, further improvement of scripts and the development of new ones will be available only through our server: waveform-analyzer.com/

This means that further hacking of our software will be very difficult to do.

On the other hand, we are willing and ready to partake in mutually beneficial cooperation.
Last edit: 3 years 1 month ago by VladimirPostolovsky.
The following user(s) said Thank You: cadman777, juergen.scholl, Chad

Please Log in or Create an account to join the conversation.

More
3 years 1 month ago #47479 by stevieturbo
Replied by stevieturbo on topic Rotkee vs. Pico
It's disappointing to hear it is pirated.

But with so little information out there, it is hard to know. I would have liked to buy the USB Autoscope, but it just seemed so difficult to actually purchase, with no easy online sellers.
Added to that the risks involved transfering funds in the manner they wish.....the likes of these cheaper options just seemed to have less risk involved.

But which aspect is pirated ? MTPro ? Rotkee ? Diamag ? Or is it just the aspects relating to Andrey's scripts ?

I actually registered on the UJSB Autoscope forum some time ago, but even after weeks, the registration email confirmation never came through. And I did email admin a few times to try and get it resolved.
Although I did re-try a couple of weeks ago, and it did work this time.

You do have a good product, and it could sell much better if there was more information out there, and easier more trusted routes of purchase in the "western" world so to speak.
The following user(s) said Thank You: cadman777

Please Log in or Create an account to join the conversation.

Time to create page: 0.305 seconds