*** Restricting New Posts to SD Premium Members ONLY *** (09 May 2025)

Just made a new account? Can't post? Click above.

SD Premium GM 3.8L crank sensor series

  • Tyler
  • Tyler's Avatar Topic Author
  • Offline
  • Moderator
  • Moderator
  • Full time HACK since 2012
More
7 years 10 months ago #16627 by Tyler
SD Premium GM 3.8L crank sensor series was created by Tyler
Another thread sent me looking for a Premium series that I can't find anymore. This was from a couple years ago, I think, with the vehicle at the body shop. Crank pulley and sensor had been replaced, ended up being a bad pulley.

Am I imagining stuff? :blink: Or, are these videos out there, and I just suck at searching?

Please Log in or Create an account to join the conversation.

  • Noah
  • Noah's Avatar
  • Offline
  • Moderator
  • Moderator
  • Give code definitions with numbers!
More
7 years 10 months ago - 7 years 10 months ago #16637 by Noah
Replied by Noah on topic SD Premium GM 3.8L crank sensor series
Hmm, the search function seems kind of weak...
I tried the terms
3800
GM
Balancer
Ckp
All with 0 results...

Was it a 3800?
"Ground cannot be checked with a 10mm socket"
Last edit: 7 years 10 months ago by Noah.

Please Log in or Create an account to join the conversation.

  • Tyler
  • Tyler's Avatar Topic Author
  • Offline
  • Moderator
  • Moderator
  • Full time HACK since 2012
More
7 years 10 months ago #16731 by Tyler
Replied by Tyler on topic SD Premium GM 3.8L crank sensor series
Definitely a 3800. So, I'm not crazy? :silly:

This came up during a Repair thread:

www.scannerdanner.com/forum/post-your-re...anking-no-start.html

I'll see if this series is still out there somewhere. One of the best case studies on Premium, as I remember.

Please Log in or Create an account to join the conversation.

  • Noah
  • Noah's Avatar
  • Offline
  • Moderator
  • Moderator
  • Give code definitions with numbers!
More
7 years 10 months ago #16817 by Noah
Replied by Noah on topic SD Premium GM 3.8L crank sensor series
www.scannerdanner.com/scannerdanner-prem...-gm-3800-engine.html
It wasn't this one with the leaking intake extinguishing spark?
"Ground cannot be checked with a 10mm socket"

Please Log in or Create an account to join the conversation.

  • Tyler
  • Tyler's Avatar Topic Author
  • Offline
  • Moderator
  • Moderator
  • Full time HACK since 2012
More
7 years 10 months ago #16879 by Tyler
Replied by Tyler on topic SD Premium GM 3.8L crank sensor series
Negative, but that was a great series, too! Tutti57's car is fixed, so we don't NEED the series anymore, but I kinda wanna rewatch it now just for giggles. :cheer:
The following user(s) said Thank You: Tutti57

Please Log in or Create an account to join the conversation.

More
7 years 10 months ago #16893 by Juiced105
Replied by Juiced105 on topic SD Premium GM 3.8L crank sensor series
Was it this one?

www.scannerdanner.com/scannerdanner-prem...se-study-part-1.html
The following user(s) said Thank You: Noah

Please Log in or Create an account to join the conversation.

  • Tyler
  • Tyler's Avatar Topic Author
  • Offline
  • Moderator
  • Moderator
  • Full time HACK since 2012
More
7 years 10 months ago #17096 by Tyler
Replied by Tyler on topic SD Premium GM 3.8L crank sensor series

Juiced105 wrote: Was it this one?

www.scannerdanner.com/scannerdanner-prem...se-study-part-1.html


YES. Thank you so much! :cheer: How'd you find it?

Please Log in or Create an account to join the conversation.

More
7 years 10 months ago #17103 by Juiced105
Replied by Juiced105 on topic SD Premium GM 3.8L crank sensor series
Just happened to come upon it.

Please Log in or Create an account to join the conversation.

Time to create page: 0.258 seconds