Help us help you. By posting the year, make, model and engine near the beginning of your help request, followed by the symptoms (no start, high idle, misfire etc.) Along with any prevalent Diagnostic Trouble Codes, aka DTCs, other forum members will be able to help you get to a solution more quickly and easily!
I’m based in the UK and I’m hoping someone on here might be able to help me out with wiring diagram for a 2011 Peugeot 4007. I have a message on the car saying check engine oil level, oil level is fine, I also have a P250B code when scanned with the Verus Pro, Oil pressure sensor signal open circuit or excessive temp. I just want to check if it’s the sensor or wiring issue.
I don't have access to service info for your region, but the guided component test portion of your Verus might have the information you need to troubleshoot that circuit.
My Verus Pro is not full up to date, currently on 13.2. The Verus shows minimal data for this car, the car is basically a Mitsubishi Outlander. I’ll take a look in the guided component section, I’m at work the next few days but I will update so if anyone else has a diagram or any info that might help I’ll check back and keep up to date.
Usually it’s a combined oil level/oil temperature with a power ground and signal,you should be able to read it through the engine live data or body control module,look for input signals may take some locating,,,,,....
Topic Author
