*** Restricting New Posts to SD Premium Members ONLY *** (09 May 2025)

Just made a new account? Can't post? Click above.

Tell us and our members who you are, what you like and why you became a member of this site.
We welcome all new members and hope to see you around a lot!

Introduction

  • BreakerPoints
  • BreakerPoints's Avatar Topic Author
  • Offline
  • New Member
  • New Member
More
4 years 10 months ago #45642 by BreakerPoints
Introduction was created by BreakerPoints
Hi ppl, a new member here. Greetings from Europe. I have been following sd for a long time now but this forum got under my radar the whole time. I guess it is time to see what is going on here. I will need help and i will try to provide help with my limited knowledge. I am sure i will learn something here as i did following sd.
Best regards.

Please Log in or Create an account to join the conversation.

More
4 years 10 months ago - 4 years 10 months ago #45646 by Andy.MacFadyen
Replied by Andy.MacFadyen on topic Introduction
Good to have you here :-) and a Happy New Year !
I can tell by your username you are from the old school !
" We're trying to plug a hole in the universe, what are you doing ?. "
(Walter Bishop Fringe TV show)
Last edit: 4 years 10 months ago by Andy.MacFadyen.

Please Log in or Create an account to join the conversation.

  • BreakerPoints
  • BreakerPoints's Avatar Topic Author
  • Offline
  • New Member
  • New Member
More
4 years 10 months ago #45660 by BreakerPoints
Replied by BreakerPoints on topic Introduction

Andy.MacFadyen wrote: I can tell by your username you are from the old school !

Not that old :lol: but yea i started with them.

Please Log in or Create an account to join the conversation.

  • Noah
  • Noah's Avatar
  • Offline
  • Moderator
  • Moderator
  • Give code definitions with numbers!
More
4 years 10 months ago #45683 by Noah
Replied by Noah on topic Introduction
Welcome!
Thanks for joining
"Ground cannot be checked with a 10mm socket"

Please Log in or Create an account to join the conversation.

Time to create page: 0.266 seconds