Tell us and our members who you are, what you like and why you became a member of this site.
We welcome all new members and hope to see you around a lot!
We welcome all new members and hope to see you around a lot!
New to Scanner Danner- Tom
- Motorheadtom
- Topic Author
- Offline
- New Member
Less
More
- Posts: 3
- Thank you received: 3
4 years 5 months ago #35179
by Motorheadtom
New to Scanner Danner- Tom was created by Motorheadtom
Hello, I'm new to Scanner Danner forum. I found you searching for updated scanner info.
I was a master auto tech with L1 until about 2008 but was called away to a different vocation until this summer. I moved near my grandchildren in NC and I've returned to auto tech world in a different venue. I'm building old cars with late-model drive trains.
I have dusted off my old tools and looking to see what is the most economical way to get the information I need from vehicles.
I currently have a Vantage Pro and an old Solus with updates up to about 2002. I was going to post what version my Vantage was but the battery is completely dead. I probably wont work on anything much newer than 2015.
I appreciate the knowledge in just few posts I've read here and look forward to continuing to learn and hopefully contribute where possible.
I was a master auto tech with L1 until about 2008 but was called away to a different vocation until this summer. I moved near my grandchildren in NC and I've returned to auto tech world in a different venue. I'm building old cars with late-model drive trains.
I have dusted off my old tools and looking to see what is the most economical way to get the information I need from vehicles.
I currently have a Vantage Pro and an old Solus with updates up to about 2002. I was going to post what version my Vantage was but the battery is completely dead. I probably wont work on anything much newer than 2015.
I appreciate the knowledge in just few posts I've read here and look forward to continuing to learn and hopefully contribute where possible.
The following user(s) said Thank You: aboudi.naddaf
Please Log in or Create an account to join the conversation.
4 years 5 months ago #35184
by Dylan
Replied by Dylan on topic New to Scanner Danner- Tom
Welcome to the forum! Thanks for joining
The following user(s) said Thank You: aboudi.naddaf
Please Log in or Create an account to join the conversation.
- Andy.MacFadyen
- Offline
- Moderator
Less
More
- Posts: 3353
- Thank you received: 1031
4 years 5 months ago #35199
by Andy.MacFadyen
" We're trying to plug a hole in the universe, what are you doing ?. "
(Walter Bishop Fringe TV show)
Replied by Andy.MacFadyen on topic New to Scanner Danner- Tom
Welcome Tom good to have you on the Forum
" We're trying to plug a hole in the universe, what are you doing ?. "
(Walter Bishop Fringe TV show)
The following user(s) said Thank You: aboudi.naddaf
Please Log in or Create an account to join the conversation.
Less
More
- Posts: 4422
- Thank you received: 961
4 years 5 months ago #35207
by Noah
"Ground cannot be checked with a 10mm socket"
Replied by Noah on topic New to Scanner Danner- Tom
Welcome to the community Tom. Looking forward to seeing some of those hot rods
"Ground cannot be checked with a 10mm socket"
The following user(s) said Thank You: aboudi.naddaf
Please Log in or Create an account to join the conversation.
Time to create page: 0.218 seconds