Tell us and our members who you are, what you like and why you became a member of this site.
We welcome all new members and hope to see you around a lot!
We welcome all new members and hope to see you around a lot!
tonybaroni joining scannerdanner!
- tonybaroni
-
Topic Author
- Offline
- Junior Member
-
Less
More
- Posts: 20
- Thank you received: 1
6 years 2 months ago #35059
by tonybaroni
tonybaroni joining scannerdanner! was created by tonybaroni
I enjoy driving older vehicles, and working on them. The main vehicle I work on is a 1995 Chevy G30 Beauville extended 12 passenger van. It is OBD1, and I have been looking for information on how to diagnose these older cars without OBDII or a scan tool. I do have a laptop which I can connect to the OBD1 computer, I can program chips, though I am just learning about what to change in those chips!
My current challenge is figuring out a rough running, missing and sometimes detonating engine problem. This led me to searching on how to use a scope on an engine, which led me to ScannerDanner. Just using a test light, and cranking over an engine I can learn so much about how it's running!
Thank you ScannerDanner for your teachings, and youtube channel, and for hosting this forum. I am excited to learn more, get my vehicle in tip top shape, and take a road trip soon!
My current challenge is figuring out a rough running, missing and sometimes detonating engine problem. This led me to searching on how to use a scope on an engine, which led me to ScannerDanner. Just using a test light, and cranking over an engine I can learn so much about how it's running!
Thank you ScannerDanner for your teachings, and youtube channel, and for hosting this forum. I am excited to learn more, get my vehicle in tip top shape, and take a road trip soon!
Please Log in or Create an account to join the conversation.
- Noah
-
- Offline
- Moderator
-
- Give code definitions with numbers!
Less
More
- Posts: 4963
- Thank you received: 1113
6 years 2 months ago #35113
by Noah
"Ground cannot be checked with a 10mm socket"
Replied by Noah on topic tonybaroni joining scannerdanner!
Welcome to the forum Tony.
"Ground cannot be checked with a 10mm socket"
Please Log in or Create an account to join the conversation.
- Dylan
-
- Offline
- Moderator
-
- Belgium, Europe
Less
More
- Posts: 1461
- Thank you received: 327
6 years 2 months ago #35135
by Dylan
Replied by Dylan on topic tonybaroni joining scannerdanner!
Welcome aboard
Please Log in or Create an account to join the conversation.
Time to create page: 0.330 seconds