Tell us and our members who you are, what you like and why you became a member of this site.
We welcome all new members and hope to see you around a lot!

New Member

More
4 years 5 months ago #34964 by J Barber
New Member was created by J Barber
How y'all doin' ?
Been finding some good info in scanner danner's you tube vids and ebook, so thought I better join.
Just ordered a pico scope with lots of goodies. Been doing this type of work for over 40 years so I guess that makes me an old dog learning some new tricks.
Looking forward to reading about everyone's experiences solving problems.
Cheers!

Please Log in or Create an account to join the conversation.

More
4 years 5 months ago #34967 by Dylan
Replied by Dylan on topic New Member
Welcome! Thanks for joining ;)
I'm pretty sure you'll have fun with your Pico. For me the combination of the ebook/paper book with the premium channel worked best.

Please Log in or Create an account to join the conversation.

More
4 years 5 months ago #34968 by J Barber
Replied by J Barber on topic New Member
Thanks Dylan. Glad to be here.
My first dealings with a digital scope was in the late 90's with a Fluke 98.
I used it until the plastic case got so brittle it literally fell apart.
Looking forward to using the pico.

Please Log in or Create an account to join the conversation.

  • Noah
  • Noah's Avatar
  • Offline
  • Moderator
  • Moderator
  • Give code definitions with numbers!
More
4 years 5 months ago #34975 by Noah
Replied by Noah on topic New Member
Welcome to the community, thanks for joining :)
"Ground cannot be checked with a 10mm socket"

Please Log in or Create an account to join the conversation.

Time to create page: 0.195 seconds