Tell us and our members who you are, what you like and why you became a member of this site.
We welcome all new members and hope to see you around a lot!

Yet Another Newb

More
6 years 4 months ago #16287 by mx5tc
Yet Another Newb was created by mx5tc
Mitch here. I've been "playing" with cars since the late 1960s and came across the ScannerDanner site when I was searching for more information on using my "new to me" MAC ET2010 scope. I've been very impressed with the content and comraderie I've seen in the forums here; so much that I just ordered the paper copy of Paul's book from AES today.

Probably good timing on my part; a friend's Wrangler JK just developed electrical gremlins in the "wonderful" MOPAR TIPM and I'm going to have to diagnose the fault properly (already scanned PCM/ECM..no stored or pending DTCs) to prevent him from getting fleeced at the local stealership.

Please Log in or Create an account to join the conversation.

More
6 years 4 months ago #16288 by Dylan
Replied by Dylan on topic Yet Another Newb
Welcome to the forum Mitch! Yes indeed. We have a great bunch of guys and gals here ;)
The book is great. I'm sure you'll be pleased with it.
So it seems there's some diagnostics coming your way with that Wrangler :)
Feel free to post any technical question in the repair section.

Please Log in or Create an account to join the conversation.

More
6 years 4 months ago - 6 years 4 months ago #16344 by Andy.MacFadyen
Replied by Andy.MacFadyen on topic Yet Another Newb
First of all welcome to our crazy mob,
Good luck with the TIPM .....
" We're trying to plug a hole in the universe, what are you doing ?. "
(Walter Bishop Fringe TV show)
Last edit: 6 years 4 months ago by Andy.MacFadyen.

Please Log in or Create an account to join the conversation.

  • Noah
  • Noah's Avatar
  • Offline
  • Moderator
  • Moderator
  • Give code definitions with numbers!
More
6 years 4 months ago #16376 by Noah
Replied by Noah on topic Yet Another Newb
Yup, welcome to the gang ;)
"Ground cannot be checked with a 10mm socket"

Please Log in or Create an account to join the conversation.

Time to create page: 0.192 seconds