Tell us and our members who you are, what you like and why you became a member of this site.
We welcome all new members and hope to see you around a lot!

where to start

More
6 years 5 months ago #15196 by hellocharles
where to start was created by hellocharles
I have ordered the book . but not sure where to start on the website. hello too everyone. we have a small mechanics shop and a automotive machine shop , boring honing balancing etc. do i just go to the first you tube video . is that in sync with the book?

Please Log in or Create an account to join the conversation.

  • Noah
  • Noah's Avatar
  • Offline
  • Moderator
  • Moderator
  • Give code definitions with numbers!
More
6 years 5 months ago - 6 years 5 months ago #15263 by Noah
Replied by Noah on topic where to start
Hello there, welcome to the forum!

The Premium videos hosted on this site ( www.scannerdanner.com/scannerdanner-premium-chapters.html ) are listed by chapter. If you want to follow along with the book, Start with Universal Testing Methods : Chapter 1.

The free videos on YouTube ( www.scannerdanner.com/youtube-videos.html ) are also grouped by chapter, but are mostly repair videos and case studies, where as the premium stuff is more classroom lectures and breaking down case studies.
"Ground cannot be checked with a 10mm socket"
Last edit: 6 years 5 months ago by Noah.

Please Log in or Create an account to join the conversation.

More
6 years 5 months ago #15382 by Dylan
Replied by Dylan on topic where to start
Hello sir. Welcome to the SD community :)

Please Log in or Create an account to join the conversation.

Time to create page: 0.182 seconds