Tell us and our members who you are, what you like and why you became a member of this site.
We welcome all new members and hope to see you around a lot!

New Member

More
6 years 9 months ago #11475 by Davil LS3
New Member was created by Davil LS3
Dave here, I am new to Scanner Danner. I have been watching his site for over 3 years, and learn every time I watch Pauls videos. I enjoy working on my S10 as a hobby and have done many mods to it. Handling is my favorite success and want to install the Camaro or Cadillac Brembo brakes down the road. I am considering converting my truck from 4.3 to a Camaro doner LS engine complete and have it somg legal for and registration.

Please Log in or Create an account to join the conversation.

  • Noah
  • Noah's Avatar
  • Offline
  • Moderator
  • Moderator
  • Give code definitions with numbers!
More
6 years 9 months ago #11485 by Noah
Replied by Noah on topic New Member
Welcome to the forum Dave!
Sounds like a cool truck you've got going there.

Feel free to share pics and builds in the off topic section,
especially if you end up doing the Brembo upgrade.

I put a fuel injected Mustang 5.0 HO into a step side Ranger at the junkyard a while back, and I know a few guys who have put 350s into s10 pick ups, Blazers and Astro vans.

"Ground cannot be checked with a 10mm socket"

Please Log in or Create an account to join the conversation.

More
6 years 9 months ago #11493 by Dylan
Replied by Dylan on topic New Member
Nice to have you on the forum Dave. Welcome!

Please Log in or Create an account to join the conversation.

Time to create page: 0.248 seconds