Tell us and our members who you are, what you like and why you became a member of this site.
We welcome all new members and hope to see you around a lot!

Introduction

More
6 years 11 months ago #10246 by Pontisteve
Introduction was created by Pontisteve
Hi, I am an EFI calibrator, engine tuner, and diagnostician. I work on Fords and GMs mainly. I learned a lot about diagnostics from Paul, and am a long time subscriber. I own Drag Radial Performance, and specialize in tuning and diagnosing the old 5.0L Mustangs but work on all the Fords and GMs. I also write EFI tech articles, an occasional online magazine article, and teach tuning.

Please Log in or Create an account to join the conversation.

More
6 years 11 months ago #10249 by Andy.MacFadyen
Replied by Andy.MacFadyen on topic Introduction
Welcome. Nice CV your input will be much welcome. ,,,B) :cheer:
" We're trying to plug a hole in the universe, what are you doing ?. "
(Walter Bishop Fringe TV show)

Please Log in or Create an account to join the conversation.

More
6 years 11 months ago #10256 by Dylan
Replied by Dylan on topic Introduction
Welcome to the forum Steve! Great to have you here ;)

Please Log in or Create an account to join the conversation.

  • Noah
  • Noah's Avatar
  • Offline
  • Moderator
  • Moderator
  • Give code definitions with numbers!
More
6 years 11 months ago #10272 by Noah
Replied by Noah on topic Introduction
Welcome to the forum Steve!
That VE article you posted was really good. Looking forward to your input around the forum.
"Ground cannot be checked with a 10mm socket"

Please Log in or Create an account to join the conversation.

More
6 years 11 months ago #10290 by matt.white
Replied by matt.white on topic Re:Introduction
Welcome Steve.

I have to ask, how did you enter the world of tuning? From someone on the outside it seems a very intimidating world.


Sent from my iPhone using Tapatalk

Please Log in or Create an account to join the conversation.

  • Noah
  • Noah's Avatar
  • Offline
  • Moderator
  • Moderator
  • Give code definitions with numbers!
More
6 years 11 months ago #10325 by Noah
Replied by Noah on topic Re:Introduction

matt.white wrote: Welcome Steve.

I have to ask, how did you enter the world of tuning? From someone on the outside it seems a very intimidating world.


Sent from my iPhone using Tapatalk

+1
I'm very interested in this as well! I have a Fox Body that's going to need a tune and would love to know what goes into making it happen!
"Ground cannot be checked with a 10mm socket"

Please Log in or Create an account to join the conversation.

Time to create page: 0.225 seconds