TIMED OUT.
- paul.simpson
- Topic Author
- Offline
- Senior Member
- Fat fingers and small kèypads don't get on
- Posts: 47
- Thank you received: 1
After logging back in all my work was lost.
May be auto save or a warning to say your going to be dropped out, or both.
Please Log in or Create an account to join the conversation.
- Posts: 4445
- Thank you received: 969
When you log back in, open the thread you were replying too.
Then, select reply topic instead of quick reply and all your work will still be there.
"Ground cannot be checked with a 10mm socket"
Please Log in or Create an account to join the conversation.
- paul.simpson
- Topic Author
- Offline
- Senior Member
- Fat fingers and small kèypads don't get on
- Posts: 47
- Thank you received: 1
Please Log in or Create an account to join the conversation.
- paul.simpson
- Topic Author
- Offline
- Senior Member
- Fat fingers and small kèypads don't get on
- Posts: 47
- Thank you received: 1
A just tried it like you said and it's done it again .
Please Log in or Create an account to join the conversation.
- Posts: 4445
- Thank you received: 969
As for the karma thing, I usually just give people who go out of their way to help a bump in karma. Or if someone has made a few posts and they seem like they've got their head on straight and are open to suggestions and the help they're getting, I give them a bump.
There's no animosity or condescending crap on this forum, so I've never taken karma away.
"Ground cannot be checked with a 10mm socket"
Please Log in or Create an account to join the conversation.
- paul.simpson
- Topic Author
- Offline
- Senior Member
- Fat fingers and small kèypads don't get on
- Posts: 47
- Thank you received: 1
i managed to extract part of the text that prevented me uploading the other day , can you see if you can make any sense from it . Hope it helps.
Error
Illegal mix of collations (utf8_general_ci,IMPLICIT) and (utf8mb4_general_ci,COERCIBLE) for operation '=' SQL=SELECT m.id FROM #__kunena_messages AS m INNER JOIN #__kunena_messages_text AS t ON m.id=t.mesid WHERE m.userid='1551' AND m.ip='77.98.9.218' AND t.message='Hi, is the word diesel a bad word here.
Please Log in or Create an account to join the conversation.
-onyx
Please Log in or Create an account to join the conversation.
- paul.simpson
- Topic Author
- Offline
- Senior Member
- Fat fingers and small kèypads don't get on
- Posts: 47
- Thank you received: 1
I'll try and not to wonder off or get side tracked off next i time decide to write something
Please Log in or Create an account to join the conversation.
- Posts: 4445
- Thank you received: 969
I make a point of copying my work before I hit post.paul.simpson wrote: Ok cool
I'll try and not to wonder off or get side tracked off next i time decide to write something
Sometimes it takes a while to bounce back and forth between diagrams and the forum and YouTube to post relevant videos and such.
"Ground cannot be checked with a 10mm socket"
Please Log in or Create an account to join the conversation.
- Posts: 4445
- Thank you received: 969
Thank you Onyx!onyx wrote: clear you cache and try it again. the time limit is set at 15 min.
"Ground cannot be checked with a 10mm socket"
Please Log in or Create an account to join the conversation.