Day 4 part 1: relative compression testing continued.
Less
More
- Posts: 4417
- Thank you received: 959
5 years 4 months ago #25070
by Noah
"Ground cannot be checked with a 10mm socket"
Day 4 part 1: relative compression testing continued. was created by Noah
www.scannerdanner.com/scannerdanner-prem...sting-continued.html
You really have raised the bar with this semesters videos. Seems like a good year to be in Mr. Danner's class
But where's the comment box for the latest video? I don't think I over looked it, but who knows ?
You really have raised the bar with this semesters videos. Seems like a good year to be in Mr. Danner's class
But where's the comment box for the latest video? I don't think I over looked it, but who knows ?
"Ground cannot be checked with a 10mm socket"
Please Log in or Create an account to join the conversation.
- ScannerDanner
- Offline
- Administrator
- Religion says do, Jesus says done!
Less
More
- Posts: 937
- Thank you received: 485
5 years 4 months ago #25075
by ScannerDanner
Don't be a parts changer!
Replied by ScannerDanner on topic Day 4 part 1: relative compression testing continued.
Fixed! Sorry about that. Thanks Noah!
For those in the know, this was my last time teaching through this material. I successfully recorded about 27 days of a 39 day class. I will have all of it up eventually. I'm mixing in case studies too because a lot of viewers have had these lectures already. But I did have my on-line community in mind during these recordings and always tried to add to what I have done in the past. Plus the camera work is awesome, so honestly, the new guys coming into SD Premium have it good with this new style.
Thanks again for sharing this here Noah!
For those in the know, this was my last time teaching through this material. I successfully recorded about 27 days of a 39 day class. I will have all of it up eventually. I'm mixing in case studies too because a lot of viewers have had these lectures already. But I did have my on-line community in mind during these recordings and always tried to add to what I have done in the past. Plus the camera work is awesome, so honestly, the new guys coming into SD Premium have it good with this new style.
Thanks again for sharing this here Noah!
Don't be a parts changer!
Please Log in or Create an account to join the conversation.
- ScannerDanner
- Offline
- Administrator
- Religion says do, Jesus says done!
Less
More
- Posts: 937
- Thank you received: 485
5 years 4 months ago #25077
by ScannerDanner
Don't be a parts changer!
Replied by ScannerDanner on topic Day 4 part 1: relative compression testing continued.
Oh and we really didn't get the cameras right until about day 5 or 6. So day 4 is still just the go pro and a desktop recording. I think day 5 I brought in another camera.
Chapters 2 and 3 (which I think are the heart and soul of my material) should be really good! I think day 6 or day 7 starts with chapter 2.
Chapters 2 and 3 (which I think are the heart and soul of my material) should be really good! I think day 6 or day 7 starts with chapter 2.
Don't be a parts changer!
Please Log in or Create an account to join the conversation.
Less
More
- Posts: 4417
- Thank you received: 959
5 years 4 months ago #25083
by Noah
"Ground cannot be checked with a 10mm socket"
Replied by Noah on topic Day 4 part 1: relative compression testing continued.
Looking forward to it
"Ground cannot be checked with a 10mm socket"
Please Log in or Create an account to join the conversation.
Time to create page: 0.209 seconds