*** Restricting New Posts to SD Premium Members ONLY *** (09 May 2025)

Just made a new account? Can't post? Click above.

Help us help you. By posting the year, make, model and engine near the beginning of your help request, followed by the symptoms (no start, high idle, misfire etc.) Along with any prevalent Diagnostic Trouble Codes, aka DTCs, other forum members will be able to help you get to a solution more quickly and easily!

5v on everything but the signal wire

  • jstnboisvert
  • jstnboisvert's Avatar Topic Author
  • Offline
  • New Member
  • New Member
More
3 years 5 months ago #56195 by jstnboisvert
5v on everything but the signal wire was created by jstnboisvert
I have voltage on both outside wires there’s no negative on this 2011 Sentra crank sensor

Please Log in or Create an account to join the conversation.

  • VegasJAK
  • VegasJAK's Avatar
  • Offline
  • Platinum Member
  • Platinum Member
  • Silencing the Parts Cannon
More
3 years 5 months ago #56284 by VegasJAK
Replied by VegasJAK on topic 5v on everything but the signal wire
outside pins are black = ground -- white = 12/5v feed. Signal is red in middle.

unplug sensor and test again. not sure but I believe nissan is 12v feed. Signal is square wave so can't see it with DVOM has to be scope.
"an open mind let's knowledge flow in and wisdom flow out for a man who has neither never listens to those who have both".
Being wrong doesn't bother me, it's being right and not understanding why that does

Please Log in or Create an account to join the conversation.

Time to create page: 0.238 seconds