*** Restricting New Posts to SD Premium Members ONLY *** (09 May 2025)

Just made a new account? Can't post? Click above.

Help us help you. By posting the year, make, model and engine near the beginning of your help request, followed by the symptoms (no start, high idle, misfire etc.) Along with any prevalent Diagnostic Trouble Codes, aka DTCs, other forum members will be able to help you get to a solution more quickly and easily!

2005 F-150 4.2 V6. How to get to the plugs and wires

  • dbrantley
  • dbrantley's Avatar Topic Author
  • Offline
  • New Member
  • New Member
More
3 years 5 months ago #56057 by dbrantley
2005 F-150 4.2 V6. How to get to the plugs and wires was created by dbrantley
I want to replace the plugs and wires on my 2005 F150 4.2 V6. This is one with the normal spark plugs and not the one ones that like to break off.
The problem is that I can not figure out any good way to get at the wires to pull them. It seems like I have to disassemble half the engine to get to them. Especically the number 3(right side closest to firewall)
Just wondering any anyone has any suggestions on how best to get at them.
A few options I have considered are to pull the wheel wells, the evap line and the engine hoist point.
However before I go to all that trouble, maybe I am missing a simpler solution.

Please Log in or Create an account to join the conversation.

Time to create page: 0.267 seconds