*** Restricting New Posts to SD Premium Members ONLY *** (09 May 2025)

Just made a new account? Can't post? Click above.

Help us help you. By posting the year, make, model and engine near the beginning of your help request, followed by the symptoms (no start, high idle, misfire etc.) Along with any prevalent Diagnostic Trouble Codes, aka DTCs, other forum members will be able to help you get to a solution more quickly and easily!

Testing fuel injector with scope

  • kamiwolf0893
  • kamiwolf0893's Avatar Topic Author
  • Offline
  • Junior Member
  • Junior Member
More
3 years 6 months ago #55647 by kamiwolf0893
Testing fuel injector with scope was created by kamiwolf0893
Hi guys, I've an mr2 with a 1zz engine. Is it the live control wire I back-probe on the injector plug? or can I get away with back-probing the ground at the ECU? D1-D4? I appear to be getting a waveform at the ground but it doesn't look anything like an injector pulse should..
Attachments:

Please Log in or Create an account to join the conversation.

  • VegasJAK
  • VegasJAK's Avatar
  • Offline
  • Platinum Member
  • Platinum Member
  • Silencing the Parts Cannon
More
3 years 6 months ago #55650 by VegasJAK
Replied by VegasJAK on topic Testing fuel injector with scope
Voltage testing would be to the control wire. Make sure you have a good ground.
"an open mind let's knowledge flow in and wisdom flow out for a man who has neither never listens to those who have both".
Being wrong doesn't bother me, it's being right and not understanding why that does

Please Log in or Create an account to join the conversation.

Time to create page: 0.244 seconds