*** Restricting New Posts to SD Premium Members ONLY *** (09 May 2025)

Just made a new account? Can't post? Click above.

Help us help you. By posting the year, make, model and engine near the beginning of your help request, followed by the symptoms (no start, high idle, misfire etc.) Along with any prevalent Diagnostic Trouble Codes, aka DTCs, other forum members will be able to help you get to a solution more quickly and easily!

Bias voltage

  • docraymund
  • docraymund's Avatar Topic Author
  • Offline
  • New Member
  • New Member
More
3 years 6 months ago #55143 by docraymund
Bias voltage was created by docraymund
Good morning! I have a question: how would you know if a system uses bias voltage by using only a multimeter?

Please Log in or Create an account to join the conversation.

  • juergen.scholl
  • juergen.scholl's Avatar
  • Offline
  • Platinum Member
  • Platinum Member
  • Active partschanger
More
3 years 6 months ago #55148 by juergen.scholl
Replied by juergen.scholl on topic Bias voltage
Bias voltage would show up measuring dc voltage on a disconnected signal wire and getting a reading different from v ref and ref ground/low.
An expert is someone who knows each time more on each time less, until he finally knows absolutely everything about absolutely nothing.
The following user(s) said Thank You: Tyler

Please Log in or Create an account to join the conversation.

Time to create page: 0.320 seconds