*** Restricting New Posts to SD Premium Members ONLY *** (09 May 2025)

Just made a new account? Can't post? Click above.

Help us help you. By posting the year, make, model and engine near the beginning of your help request, followed by the symptoms (no start, high idle, misfire etc.) Along with any prevalent Diagnostic Trouble Codes, aka DTCs, other forum members will be able to help you get to a solution more quickly and easily!

Cps Ford focus 2014 gdi 2.0

  • autojoe
  • autojoe's Avatar Topic Author
  • Offline
  • Elite Member
  • Elite Member
More
3 years 9 months ago #53609 by autojoe
Cps Ford focus 2014 gdi 2.0 was created by autojoe
How hard to replace? Need 2 special tools just to replace crank sensor unbelievable. Have to rotate crank 45 degrees btdc..does I assume Ford doesn't use a bias voltage on signal circuit hall effect. Tsb on possible harness damage rubbing on intake manifold. Never seen where you have to turn crank buy special tools to replace crank sensor. Is this a Ford thing or 2.0 thing or other manufacturers doing this type of thing? Just curious. Thanks in advance for your assistance.

Please Log in or Create an account to join the conversation.

Time to create page: 0.312 seconds