*** Restricting New Posts to SD Premium Members ONLY *** (09 May 2025)
Just made a new account? Can't post? Click above.
Help us help you. By posting the year, make, model and engine near the beginning of your help request, followed by the symptoms (no start, high idle, misfire etc.) Along with any prevalent Diagnostic Trouble Codes, aka DTCs, other forum members will be able to help you get to a solution more quickly and easily!
2013 Cadillac XTS 3.6 vin n
- Cheryl
-
Topic Author
- Offline
- Platinum Member
-
Less
More
- Posts: 1214
- Thank you received: 215
3 years 9 months ago #53549
by Cheryl
2013 Cadillac XTS 3.6 vin n was created by Cheryl
Does anyone have a crank to cam correlation for this engine? It’s a crank no start. I checked bank 2 and it’s a match to the known good waveform but can not find bank 1. Relative compression looks funny like not even every other cylinder
Please Log in or Create an account to join the conversation.
- ProAuto
-
- Offline
- New Member
-
Less
More
- Posts: 19
- Thank you received: 5
3 years 9 months ago #53561
by ProAuto
Replied by ProAuto on topic 2013 Cadillac XTS 3.6 vin n
I have a known good of the 4 cams on a 2010 3.6 "v" motor and a 2010 3.6 "d" motor. My two are the same. Might be the same as yours. I'm getting an error message on the upload. Might not come up. Can I email it to you?
Please Log in or Create an account to join the conversation.
- ProAuto
-
- Offline
- New Member
-
Less
More
- Posts: 19
- Thank you received: 5
3 years 9 months ago #53563
by ProAuto
Replied by ProAuto on topic 2013 Cadillac XTS 3.6 vin n
Please Log in or Create an account to join the conversation.
- Cheryl
-
Topic Author
- Offline
- Platinum Member
-
Less
More
- Posts: 1214
- Thank you received: 215
3 years 9 months ago #53567
by Cheryl
Replied by Cheryl on topic 2013 Cadillac XTS 3.6 vin n
I think I can work with the cams. My bank 2 looks close to yours. Do you have each bank with the crank so I can count the teeth or cam to crank.
Please Log in or Create an account to join the conversation.
- Chad
-
- Offline
- Moderator
-
- I am not a parts changer.
Less
More
- Posts: 2120
- Thank you received: 708
3 years 9 months ago - 3 years 9 months ago #53568
by Chad
"Knowledge is a weapon. Arm yourself, well, before going to do battle."
"Understanding a question is half an answer."
I have learned more by being wrong, than I have by being right.
Replied by Chad on topic 2013 Cadillac XTS 3.6 vin n
"Knowledge is a weapon. Arm yourself, well, before going to do battle."
"Understanding a question is half an answer."
I have learned more by being wrong, than I have by being right.

Last edit: 3 years 9 months ago by Chad.
The following user(s) said Thank You: Tyler, juergen.scholl
Please Log in or Create an account to join the conversation.
- Cheryl
-
Topic Author
- Offline
- Platinum Member
-
Less
More
- Posts: 1214
- Thank you received: 215
3 years 9 months ago #53575
by Cheryl
Replied by Cheryl on topic 2013 Cadillac XTS 3.6 vin n
Thank you chad the b1 is off about 4 crank notches
Please Log in or Create an account to join the conversation.
- Cheryl
-
Topic Author
- Offline
- Platinum Member
-
Less
More
- Posts: 1214
- Thank you received: 215
3 years 9 months ago #53576
by Cheryl
Replied by Cheryl on topic 2013 Cadillac XTS 3.6 vin n
Maybe upload that to iatn?
Please Log in or Create an account to join the conversation.
Time to create page: 0.284 seconds