Help us help you. By posting the year, make, model and engine near the beginning of your help request, followed by the symptoms (no start, high idle, misfire etc.) Along with any prevalent Diagnostic Trouble Codes, aka DTCs, other forum members will be able to help you get to a solution more quickly and easily!

2009 328i

BrayanM
Topic Author
Offline
New Member

4 years 2 months ago #53458 by BrayanM

2009 328i was created by BrayanM

I have a bmw that got water in the driver side and it started after but hesitated and then there was a no crank no start. All dash lights turn on. My climate controls, horn, windows and radio stoped working. My transmission won’t go out of parking. I’ve replaced the DMW and has been programmed and still nothing. I need help.

File Attachment:

File Name: PDFdocument.pdf
File Size:34 KB

Please Log in or Create an account to join the conversation.

jcbarry
Offline
New Member

4 years 2 months ago #53481 by jcbarry

Replied by jcbarry on topic 2009 328i

Have you checked the footwell module?

Please Log in or Create an account to join the conversation.

BrayanM
Topic Author
Offline
New Member

4 years 2 months ago #53483 by BrayanM

Replied by BrayanM on topic 2009 328i

I have not. Do you think that would cause the no crank no start condition though?

Please Log in or Create an account to join the conversation.

jcbarry
Offline
New Member

4 years 2 months ago #53514 by jcbarry

Replied by jcbarry on topic 2009 328i

Not 100% sure as the FRM usually controls interior and lighting similar to a BCM. However it could be corrupting CAN networks and since where the FRM is located got wet, I'd check it.

Please Log in or Create an account to join the conversation.

Time to create page: 0.258 seconds