*** Restricting New Posts to SD Premium Members ONLY *** (09 May 2025)

Just made a new account? Can't post? Click above.

Help us help you. By posting the year, make, model and engine near the beginning of your help request, followed by the symptoms (no start, high idle, misfire etc.) Along with any prevalent Diagnostic Trouble Codes, aka DTCs, other forum members will be able to help you get to a solution more quickly and easily!

Misfire on a 2007 Ford Edge P0302.

  • Ajautorepair
  • Ajautorepair's Avatar Topic Author
  • Offline
  • New Member
  • New Member
More
3 years 9 months ago #53398 by Ajautorepair
Misfire on a 2007 Ford Edge P0302. was created by Ajautorepair
I’m working on a 2007 Ford Edge with a misfire on cylinder #2. I have replaced coil, injector and all plugs. The coil on that cylinder was melted when I removed it. Vehicle still shows a misfire on Cylinder 2

Please Log in or Create an account to join the conversation.

  • Noah
  • Noah's Avatar
  • Offline
  • Moderator
  • Moderator
  • Give code definitions with numbers!
More
3 years 9 months ago #53404 by Noah
Replied by Noah on topic Misfire on a 2007 Ford Edge P0302.
The melted coil is a very good clue.
Have you checked for coil control from the PCM?
"Ground cannot be checked with a 10mm socket"

Please Log in or Create an account to join the conversation.

Time to create page: 0.416 seconds