Help us help you. By posting the year, make, model and engine near the beginning of your help request, followed by the symptoms (no start, high idle, misfire etc.) Along with any prevalent Diagnostic Trouble Codes, aka DTCs, other forum members will be able to help you get to a solution more quickly and easily!
Before going too deep, check the transmission fluid level. Low level can cause the torque converter to stick applied while coming to a stop. They usually won't set codes with this issue.
Most Ram transmissions are checked at idle in Neutral, not Park.
I've done the battery disconnect and still have issue. I have set P0335 code on two different occasions and also a misfire code once. Can I bench test a crankshaft sensor with 12v battery and multi meter? I thought i read that sensor is activeted with 5v.
Topic Author
