*** Restricting New Posts to SD Premium Members ONLY *** (09 May 2025)

Just made a new account? Can't post? Click above.

Help us help you. By posting the year, make, model and engine near the beginning of your help request, followed by the symptoms (no start, high idle, misfire etc.) Along with any prevalent Diagnostic Trouble Codes, aka DTCs, other forum members will be able to help you get to a solution more quickly and easily!

Temp.sensor

  • greghllw
  • greghllw's Avatar Topic Author
  • Offline
  • New Member
  • New Member
More
3 years 10 months ago #52803 by greghllw
Temp.sensor was created by greghllw
06 Pontiac g6 temp.gauge.quits working,unhook batt.starts working again

Please Log in or Create an account to join the conversation.

  • Tyler
  • Tyler's Avatar
  • Offline
  • Moderator
  • Moderator
  • Full time HACK since 2012
More
3 years 10 months ago #52805 by Tyler
Replied by Tyler on topic Temp.sensor
The gauge failure is likely the result of a code being set. See it all the time on GM products.

Next time the gauge quits, DON'T disconnect the battery. Read codes first. ;) Let us know what you find.

Please Log in or Create an account to join the conversation.

  • Noah
  • Noah's Avatar
  • Offline
  • Moderator
  • Moderator
  • Give code definitions with numbers!
More
3 years 10 months ago #52816 by Noah
Replied by Noah on topic Temp.sensor

The gauge failure is likely the result of a code being set. See it all the time on GM products.

Next time the gauge quits, DON'T disconnect the battery. Read codes first. ;) Let us know what you find.
Yup p0128
"Ground cannot be checked with a 10mm socket"

Please Log in or Create an account to join the conversation.

Time to create page: 0.529 seconds