*** Restricting New Posts to SD Premium Members ONLY *** (09 May 2025)

Just made a new account? Can't post? Click above.

Help us help you. By posting the year, make, model and engine near the beginning of your help request, followed by the symptoms (no start, high idle, misfire etc.) Along with any prevalent Diagnostic Trouble Codes, aka DTCs, other forum members will be able to help you get to a solution more quickly and easily!

No spark no opening of nussle

  • Victor111
  • Victor111's Avatar Topic Author
  • Offline
  • New Member
  • New Member
More
3 years 11 months ago #52618 by Victor111
No spark no opening of nussle was created by Victor111
Comments / Questions: I had this Toyota corrola 1994 model with no spark no openings of nussle.... So i did some check on the connections and all was okay amd due to my check i found out that the ecu is not receiving signals from the ignition and i had to pull out the wires that's sending signals to the ecu with my key turn on(ignition) and uses that wire sending signals to the ecu to touch the grounded area(negative) of the engine block den o had a spark and openings of nussle at a time, due that i decided to go get some complete distributor and no spark unless i did it that way again, could it be my ecu's fault or the wiring or probably igniter??

Please Log in or Create an account to join the conversation.

  • juergen.scholl
  • juergen.scholl's Avatar
  • Offline
  • Platinum Member
  • Platinum Member
  • Active partschanger
More
3 years 11 months ago #52628 by juergen.scholl
Replied by juergen.scholl on topic No spark no opening of nussle
See the attached document for trouble shooting. According to your description I would not be surprised if you found a wiring issue....

File Attachment:

File Name: Corolla94i...heck.pdf
File Size:1,039 KB

An expert is someone who knows each time more on each time less, until he finally knows absolutely everything about absolutely nothing.
The following user(s) said Thank You: Noah, Victor111

Please Log in or Create an account to join the conversation.

Time to create page: 0.326 seconds