Help us help you. By posting the year, make, model and engine near the beginning of your help request, followed by the symptoms (no start, high idle, misfire etc.) Along with any prevalent Diagnostic Trouble Codes, aka DTCs, other forum members will be able to help you get to a solution more quickly and easily!

Pin numbers at the ECU

More
2 years 7 months ago - 2 years 7 months ago #51458 by Nelixuk2003
Hi All

Back again with another request for help

I have an Audi A1, 64 Plate that has a cam sensor open circuit code.  the owner has changed the sensor based on the code and the issue is still present.  Its a 3 wire sensor, Blue White and Brown, I'm hoping someone can tell me the pin numbers at the ECU so I can do some testing.  gaining access to the Sensor requires quite a bit of digging and removal of parts which I am trying to avoid if its not required, access to the ECU is far easier.

Hope someone can help.

 
Last edit: 2 years 7 months ago by Nelixuk2003. Reason: Change model from S1 to A1

Please Log in or Create an account to join the conversation.

  • Noah
  • Noah's Avatar
  • Offline
  • Moderator
  • Moderator
  • Give code definitions with numbers!
More
2 years 7 months ago #51460 by Noah
Replied by Noah on topic Pin numbers at the ECU
Going to need a year and engine size/code to help you out.

"Ground cannot be checked with a 10mm socket"

Please Log in or Create an account to join the conversation.

More
2 years 7 months ago - 2 years 7 months ago #51461 by Nelixuk2003
Replied by Nelixuk2003 on topic Pin numbers at the ECU
Its a 64 plate (UK) so 2014/2015,  1.6 Diesel
Last edit: 2 years 7 months ago by Nelixuk2003.

Please Log in or Create an account to join the conversation.

More
2 years 7 months ago #51462 by Nelixuk2003
Replied by Nelixuk2003 on topic Pin numbers at the ECU
I have also amended the original post as its an A1 not an S1.

Please Log in or Create an account to join the conversation.

  • Noah
  • Noah's Avatar
  • Offline
  • Moderator
  • Moderator
  • Give code definitions with numbers!
More
2 years 7 months ago - 2 years 7 months ago #51463 by Noah
Replied by Noah on topic Pin numbers at the ECU
oh I see, thank you! Hopefully someone has service info for your domestic market, I do not :(

"Ground cannot be checked with a 10mm socket"
Last edit: 2 years 7 months ago by Noah.

Please Log in or Create an account to join the conversation.

Time to create page: 0.191 seconds