Help us help you. By posting the year, make, model and engine near the beginning of your help request, followed by the symptoms (no start, high idle, misfire etc.) Along with any prevalent Diagnostic Trouble Codes, aka DTCs, other forum members will be able to help you get to a solution more quickly and easily!
So I just have a question about scope set up for checking a/c role ripple at the B+ post of the alternator. Should I be using peak detect? It seems that most alternators look a lot worse with peak detect on and I feel that if an alternator was bad enough to cause a drive ability fault that I should be able to see it fail without peak detect on. Just curious about what the proper scope settings should be. Thanks
