*** Restricting New Posts to SD Premium Members ONLY *** (09 May 2025)

Just made a new account? Can't post? Click above.

Help us help you. By posting the year, make, model and engine near the beginning of your help request, followed by the symptoms (no start, high idle, misfire etc.) Along with any prevalent Diagnostic Trouble Codes, aka DTCs, other forum members will be able to help you get to a solution more quickly and easily!

Grounded Shield wiring to crankshaft position sensor in

  • Juggernaut69
  • Juggernaut69's Avatar Topic Author
  • Offline
  • New Member
  • New Member
More
4 years 3 months ago #49830 by Juggernaut69
Grounded Shield wiring to crankshaft position sensor in was created by Juggernaut69
I have an 01 Ford Escape 2.0 zetec engine manual transmission Above All Things and I am having problems was getting crank signal then after doing some research watching scannerdanner I did some checking and found I had a grounded crank shaft position sensor wire problem is it is a shielded wire . now how can I repair this without damaging The Shield or should I just run a new wire in place of that one I already have no crank signal receiving but it does crank and no codes on a scan this wiring is in the main harness for the p c m the other wire has continuity with no grounding issues

Please Log in or Create an account to join the conversation.

Time to create page: 0.257 seconds