*** Restricting New Posts to SD Premium Members ONLY *** (09 May 2025)

Just made a new account? Can't post? Click above.

Help us help you. By posting the year, make, model and engine near the beginning of your help request, followed by the symptoms (no start, high idle, misfire etc.) Along with any prevalent Diagnostic Trouble Codes, aka DTCs, other forum members will be able to help you get to a solution more quickly and easily!

Cadillac SRX 3.6 AWD 2008 driveshaft suppor bearin

  • ivoalaska
  • ivoalaska's Avatar Topic Author
  • Offline
  • New Member
  • New Member
More
4 years 3 months ago #49652 by ivoalaska
Cadillac SRX 3.6 AWD 2008 driveshaft suppor bearin was created by ivoalaska
Hello!

I have problem with my personal car Cadillac SRX 3.6 AWD 2008. The driveshaft centre support bearing is broken (rubber part). I cant find replacement bearing and it seems i need to replace the hole driveshaft. Does anyone knows, is it replaceable and what cold be the part number, that fits? Im located in Europe, so ordering the hole driveshaft from US is pretty expencive :)

Please Log in or Create an account to join the conversation.

  • Chad
  • Chad's Avatar
  • Offline
  • Moderator
  • Moderator
  • I am not a parts changer.
More
4 years 3 months ago - 4 years 3 months ago #49653 by Chad
Replied by Chad on topic Cadillac SRX 3.6 AWD 2008 driveshaft suppor bearin
Labor time implies that the bearing is replaceable, by adding .4 hr to the drive/propeller shaft. However, I failed to find the part, too.
"Knowledge is a weapon. Arm yourself, well, before going to do battle."
"Understanding a question is half an answer."
I have learned more by being wrong, than I have by being right. :-)
Last edit: 4 years 3 months ago by Chad.

Please Log in or Create an account to join the conversation.

Time to create page: 0.306 seconds