Help us help you. By posting the year, make, model and engine near the beginning of your help request, followed by the symptoms (no start, high idle, misfire etc.) Along with any prevalent Diagnostic Trouble Codes, aka DTCs, other forum members will be able to help you get to a solution more quickly and easily!
Hi guy's, I am back. I have taken this problem to the Ford dealership and am having a problem with them, they have replaced the PCM and now the van won't crank. This is the same problem I had before with the old PCM. Does anyone know if the Body control module (BCM) will cause this problem even tho this van does not have the PATS system installed? I also would like to know if a BCM can be changed without any additional programming.
Thanks for any help you can give..
Bill
I have the van at the local ford dealership but I need to know if anyone out there has a trouble shooting chart for the no crank/no start condition on these vans.
Thanks
Bill
Topic Author
