Help us help you. By posting the year, make, model and engine near the beginning of your help request, followed by the symptoms (no start, high idle, misfire etc.) Along with any prevalent Diagnostic Trouble Codes, aka DTCs, other forum members will be able to help you get to a solution more quickly and easily!
I have good cam and crank signals but I am not getting any ignition coil driver controls. A few times I disconnected the cam sensor and It would start. If I reconnect the cam sensor, it would stay running. I checked each ignition coil driver wire at the ecm for continuity. I also checked to see if my Power to coils and grounds were not being pulled up and down. Any Ideas? cam and crank signals were good as well and they werent dropping out.