Help us help you. By posting the year, make, model and engine near the beginning of your help request, followed by the symptoms (no start, high idle, misfire etc.) Along with any prevalent Diagnostic Trouble Codes, aka DTCs, other forum members will be able to help you get to a solution more quickly and easily!

2001 Buick LeSabre ODB2 readiness monitors

More
3 years 2 months ago #47097 by Tmoses2010
2001 Buick Lesabre ODB2 first reading showed 2 readiness monitors pending. 5 minutes later after logging on a second time it showed 5 pending. Does that indicate that the ECU is faulty?

Please Log in or Create an account to join the conversation.

  • Noah
  • Noah's Avatar
  • Offline
  • Moderator
  • Moderator
  • Give code definitions with numbers!
More
3 years 2 months ago #47104 by Noah
Did you clear codes or disconnect the battery in between?
I wouldn't blame the PCM right away.

"Ground cannot be checked with a 10mm socket"

Please Log in or Create an account to join the conversation.

Time to create page: 0.181 seconds