*** Restricting New Posts to SD Premium Members ONLY *** (09 May 2025)

Just made a new account? Can't post? Click above.

Help us help you. By posting the year, make, model and engine near the beginning of your help request, followed by the symptoms (no start, high idle, misfire etc.) Along with any prevalent Diagnostic Trouble Codes, aka DTCs, other forum members will be able to help you get to a solution more quickly and easily!

positive battery cable

  • dfends@hotmail.com
  • dfends@hotmail.com's Avatar Topic Author
  • Offline
  • Junior Member
  • Junior Member
More
4 years 8 months ago #46571 by dfends@hotmail.com
positive battery cable was created by dfends@hotmail.com
]Hi everyone work on a fleet of chev express and wanted some clarity on the 2016 chev express with 6 litre engine the positive battery bolts on side terminal of the battery and goes directly to the starter i do not see any type of circuit protection device at all no fuse or link that i can see . Does anyone know if there is some sort of protection or why there is not one ? Thank you in advance[/b]

Please Log in or Create an account to join the conversation.

  • Tyler
  • Tyler's Avatar
  • Offline
  • Moderator
  • Moderator
  • Full time HACK since 2012
More
4 years 8 months ago #46572 by Tyler
Replied by Tyler on topic positive battery cable
I checked the OE diagram. You are correct - there is no fuse on the main cable to the starter.

Why no circuit protection? Good question. :silly: With a few exceptions, it's been my experience that most starter main cables aren't fused. My Nissan and both Fords aren't.

Last vehicle I saw with a fused main starter cable was a Range Rover...

Please Log in or Create an account to join the conversation.

  • dfends@hotmail.com
  • dfends@hotmail.com's Avatar Topic Author
  • Offline
  • Junior Member
  • Junior Member
More
4 years 8 months ago #46586 by dfends@hotmail.com
Replied by dfends@hotmail.com on topic positive battery cable

Please Log in or Create an account to join the conversation.

Time to create page: 0.257 seconds