*** Restricting New Posts to SD Premium Members ONLY *** (09 May 2025)

Just made a new account? Can't post? Click above.

Help us help you. By posting the year, make, model and engine near the beginning of your help request, followed by the symptoms (no start, high idle, misfire etc.) Along with any prevalent Diagnostic Trouble Codes, aka DTCs, other forum members will be able to help you get to a solution more quickly and easily!

TDI cylinder head replacement, No start!

  • e7card
  • e7card's Avatar Topic Author
  • Offline
  • New Member
  • New Member
More
4 years 9 months ago #46259 by e7card
TDI cylinder head replacement, No start! was created by e7card
2014 vw Passat TDI, I am getting a crankshaft position, camshaft position, bank1 sensor a, fault.
P001600 code
I just had the cylinder head repair, turns over but nothing as far as it wanting to start?
I was wondering if someone has experience this?
Puzzled

Please Log in or Create an account to join the conversation.

  • RJMARRA
  • RJMARRA's Avatar
  • Offline
  • Junior Member
  • Junior Member
  • 2018 NAPA/ASE Parts Specialist of the Year
More
4 years 9 months ago #46260 by RJMARRA
Replied by RJMARRA on topic TDI cylinder head replacement, No start!
sounds like your timing belt is off by a tooth

Please Log in or Create an account to join the conversation.

Time to create page: 0.338 seconds