*** Restricting New Posts to SD Premium Members ONLY *** (09 May 2025)

Just made a new account? Can't post? Click above.

Help us help you. By posting the year, make, model and engine near the beginning of your help request, followed by the symptoms (no start, high idle, misfire etc.) Along with any prevalent Diagnostic Trouble Codes, aka DTCs, other forum members will be able to help you get to a solution more quickly and easily!

P0132 p0300 03 ram 2500 5.7hemi

  • Sunshine
  • Sunshine's Avatar Topic Author
  • Offline
  • New Member
  • New Member
More
4 years 10 months ago #45507 by Sunshine
P0132 p0300 03 ram 2500 5.7hemi was created by Sunshine
Truck will chug at low rpms and bog out and stall. Only happens in park or neutral. P0132 is the code but I replaced 02 sensors with Bausch sensors. And the code is still there. I've checked wire harness and it seems fine? I dont know where else to check....

Please Log in or Create an account to join the conversation.

  • Sunshine
  • Sunshine's Avatar Topic Author
  • Offline
  • New Member
  • New Member
More
4 years 10 months ago #45508 by Sunshine
Replied by Sunshine on topic P0132 p0300 03 ram 2500 5.7hemi

Sunshine wrote: Truck will chug at low rpms and bog out and stall. Only happens in park or neutral. P0132 is the code but I replaced 02 sensors with Bausch sensors. And the code is still there. I've checked wire harness and it seems fine? I dont know where else to check....

Please Log in or Create an account to join the conversation.

More
4 years 10 months ago - 4 years 10 months ago #45509 by Hardtopdr2
Replied by Hardtopdr2 on topic P0132 p0300 03 ram 2500 5.7hemi
Whats the voltage reading on the o2 signal wire at the o2 sensor and at the pcm?
Last edit: 4 years 10 months ago by Hardtopdr2.

Please Log in or Create an account to join the conversation.

Time to create page: 0.308 seconds