*** Restricting New Posts to SD Premium Members ONLY *** (09 May 2025)

Just made a new account? Can't post? Click above.

Help us help you. By posting the year, make, model and engine near the beginning of your help request, followed by the symptoms (no start, high idle, misfire etc.) Along with any prevalent Diagnostic Trouble Codes, aka DTCs, other forum members will be able to help you get to a solution more quickly and easily!

Broken wire at coil pack connector with

More
4 years 10 months ago #45036 by MGC67
Broken wire at coil pack connector with was created by MGC67
97 Camry 2.2l code P1300
Coil pack 1 1-4 no spark found broken wire on #3 wire black,...wire came out of connector with green oxidation at end ,...
Would it be recommended replacing whole connector or just broken wire?
New type of repair for me ,.
Any advice appreciated!

Please Log in or Create an account to join the conversation.

More
4 years 10 months ago #45043 by ShawnRoberts81
Replied by ShawnRoberts81 on topic Broken wire at coil pack connector with
You can purchase a repair plug for that. Make good clean connections. I prefer solder and shrink tubing, but many people will argue that a good crimp connection is better. Just make good connections and you will be fine

Please Log in or Create an account to join the conversation.

More
4 years 10 months ago #45055 by MGC67
Replied by MGC67 on topic Broken wire at coil pack connector with
Thank you!!
Will look into new connector!!

Please Log in or Create an account to join the conversation.

Time to create page: 0.270 seconds