Help us help you. By posting the year, make, model and engine near the beginning of your help request, followed by the symptoms (no start, high idle, misfire etc.) Along with any prevalent Diagnostic Trouble Codes, aka DTCs, other forum members will be able to help you get to a solution more quickly and easily!
Looking for some repair procedure for the above code . My 2014 Focus has the Dps6 tranny and it is at the point of no crank no start . The problem started with the usual transmission overheating while driving and slipping gears (slip from driving to nuetral)
After doing my research and some testing , the clutch adjustment test failed .
Long story short , I decided to take a risk and get a TCM module and installed it and now I am getting an U1013 code when I try to program it to the car Cheacked all my powers and grounds and networks signals at TCM harness and all are good. Check AllData and Mitchell , Alldata skips this code and Mitchell is very vague no test procedure.
Anyone can help with info to test and fix this problem it will be welcomed
