*** Restricting New Posts to SD Premium Members ONLY *** (09 May 2025)

Just made a new account? Can't post? Click above.

Help us help you. By posting the year, make, model and engine near the beginning of your help request, followed by the symptoms (no start, high idle, misfire etc.) Along with any prevalent Diagnostic Trouble Codes, aka DTCs, other forum members will be able to help you get to a solution more quickly and easily!

4.6L intake manifold

More
4 years 10 months ago #44459 by MGC67
4.6L intake manifold was created by MGC67
02 Ford Explorer 200,000 miles
Needs intake manifold solid vehicle,...
I’ve been all over the Internet trying to make a decision on a aftermarket versus OEM cost approximately 380 for OEM and various other prices for aftermarket any and all opinions welcome thank you have a great day

Please Log in or Create an account to join the conversation.

More
4 years 10 months ago #44467 by Ben
Replied by Ben on topic Re:4.6L intake manifold
Haven't had any problems with aftermarket intakes, just don't over torque and crack them at the thermostat housing (or anywhere else for that matter)

Sent from my SM-G781U using Tapatalk
The following user(s) said Thank You: MGC67

Please Log in or Create an account to join the conversation.

More
4 years 10 months ago #44477 by Chizzler
Replied by Chizzler on topic Re:4.6L intake manifold
I've put on a million Dorman units with no problems. I like that it has the gaskets molded in to it so they don't crack like the OE units.
The following user(s) said Thank You: MGC67

Please Log in or Create an account to join the conversation.

Time to create page: 0.337 seconds