*** Restricting New Posts to SD Premium Members ONLY *** (09 May 2025)

Just made a new account? Can't post? Click above.

Help us help you. By posting the year, make, model and engine near the beginning of your help request, followed by the symptoms (no start, high idle, misfire etc.) Along with any prevalent Diagnostic Trouble Codes, aka DTCs, other forum members will be able to help you get to a solution more quickly and easily!

I have a 2013 ford fusion programming remote

  • Jonathan trujillo
  • Jonathan trujillo's Avatar Topic Author
  • Offline
  • New Member
  • New Member
More
5 years 3 weeks ago #42716 by Jonathan trujillo
I have a 2013 ford fusion programming remote was created by Jonathan trujillo
I have a 2013 ford fusion 1.8 i want to program new remote keys i have 1 master key and 2 new ones. How do i program it every one said i need 2 master keys to program the new keys

Please Log in or Create an account to join the conversation.

  • Chad
  • Chad's Avatar
  • Offline
  • Moderator
  • Moderator
  • I am not a parts changer.
More
5 years 3 weeks ago #42717 by Chad
Replied by Chad on topic I have a 2013 ford fusion programming remote
I believe, if you have a capable Scan-tool, you only need to have 1 original key to add additional keys. But, If PATS (Passive Anti Theft System) is erased, or reprogrammed, you will need 2, original, keys to program PATS. The scan tool will make you wait for a 10 minutes before allowing you into the PATS module. With the scan tool, settings can be changed to allow, or dis-allow, the programing of additional keys without a scan tool.
"Knowledge is a weapon. Arm yourself, well, before going to do battle."
"Understanding a question is half an answer."
I have learned more by being wrong, than I have by being right. :-)

Please Log in or Create an account to join the conversation.

Time to create page: 0.311 seconds