*** Restricting New Posts to SD Premium Members ONLY *** (09 May 2025)

Just made a new account? Can't post? Click above.

Help us help you. By posting the year, make, model and engine near the beginning of your help request, followed by the symptoms (no start, high idle, misfire etc.) Along with any prevalent Diagnostic Trouble Codes, aka DTCs, other forum members will be able to help you get to a solution more quickly and easily!

2007 infinity mx35 front drive shaft

  • Ccglenn
  • Ccglenn's Avatar Topic Author
  • Offline
  • New Member
  • New Member
More
5 years 1 month ago #42516 by Ccglenn
2007 infinity mx35 front drive shaft was created by Ccglenn
I have the old one out because it came apart, I have the right converter out , I was UN able to get the new one in so far looks like steering rack lines in the way, looks like I’ll be taking half of the car apart, I couldn’t find a labor guide on this job either anyone hints


Sent from my iPhone using Tapatalk

Please Log in or Create an account to join the conversation.

  • Noah
  • Noah's Avatar
  • Offline
  • Moderator
  • Moderator
  • Give code definitions with numbers!
More
5 years 1 month ago #42518 by Noah
Replied by Noah on topic 2007 infinity mx35 front drive shaft
I've never done one, but All data says remove cat, remove shaft.
Nothing about the rack or lines.
"Ground cannot be checked with a 10mm socket"

Please Log in or Create an account to join the conversation.

Time to create page: 0.308 seconds