2013 Camaro SS U0100

I’ve got a 13 Camaro SS A6 E38 PCM. Car just got cam, dod delete.

Car ran perfect yesterday during tuning. Went out today to work more on the tuning and when I started it, it was not idling well and had no throttle response. No MIL but I read codes and got a U0100 permanent.

Things I’ve done today,
Uploaded factory tune back in car, did not help.

Loosened and re-tightened 4 ground connectors on engine, did not help.

Un-plugged battery and un-plugged PCM connectors then put back, did not help.

Car will start, runs like crap, all the gauges work.

Do you have a scantool that can communicate with all of the modules on the car? I've never run into this code but Google said it has to do with the engine module losing communication with another or other modules. It would be helpful to know who isn't communicating.

Nissan Technician

I do have a snap on scan tool. We’ll hook it up today and see what it says.

We've had a few Camaro owners with the same issues after work was done. Check it out:

www.scannerdanner.com/forum/post-your-re...troubleshooting.html

Let the scan tool determine your next move. With the rough idle, there should be a fault code or misfire counters to help point the way.