*** Restricting New Posts to SD Premium Members ONLY *** (09 May 2025)

Just made a new account? Can't post? Click above.

Help us help you. By posting the year, make, model and engine near the beginning of your help request, followed by the symptoms (no start, high idle, misfire etc.) Along with any prevalent Diagnostic Trouble Codes, aka DTCs, other forum members will be able to help you get to a solution more quickly and easily!

[FIXED] GMC YUKON 2012 Error code P0601 internal Control Module Memory Fault

  • abe1204
  • abe1204's Avatar Topic Author
  • Offline
  • Senior Member
  • Senior Member
More
5 years 5 months ago - 5 years 5 months ago #39010 by abe1204
[FIXED] GMC YUKON 2012 Error code P0601 internal Control Module Memory Fault was created by abe1204
Hello guys, I have a code P0601 GmC yukon 2012 Sometimes running suddenly stop and on the Dash appears engine reduce power, what i do so far is cleaning battery and checked Battery Terminal pos, and Engine and Body grounds , and problem still the same,
Last edit: 5 years 5 months ago by Tyler.

Please Log in or Create an account to join the conversation.

  • Tyler
  • Tyler's Avatar
  • Offline
  • Moderator
  • Moderator
  • Full time HACK since 2012
More
5 years 5 months ago #39050 by Tyler
Replied by Tyler on topic GMC YUKON 2012 Error code P0601 internal Control Module Memory Fault
The P0601 is stored in the PCM, correct? And not another module?

If the P0601 is in the PCM, then it sounds like that module is done. :lol: P0601 is almost always the kiss of death. Load test the PCM powers and grounds at the PCM connector itself before pulling the trigger on a new one.

Please Log in or Create an account to join the conversation.

  • abe1204
  • abe1204's Avatar Topic Author
  • Offline
  • Senior Member
  • Senior Member
More
5 years 5 months ago #39052 by abe1204
Replied by abe1204 on topic GMC YUKON 2012 Error code P0601 internal Control Module Memory Fault
Thank You ,Tylor yes It fixed I changed a used one PCM ..

Please Log in or Create an account to join the conversation.

  • Tyler
  • Tyler's Avatar
  • Offline
  • Moderator
  • Moderator
  • Full time HACK since 2012
More
5 years 5 months ago #39055 by Tyler
Replied by Tyler on topic GMC YUKON 2012 Error code P0601 internal Control Module Memory Fault
Nice. B) Slapping a [FIXED] on this one.

Please Log in or Create an account to join the conversation.

  • abe1204
  • abe1204's Avatar Topic Author
  • Offline
  • Senior Member
  • Senior Member
More
5 years 5 months ago #39085 by abe1204
Replied by abe1204 on topic GMC YUKON 2012 Error code P0601 internal Control Module Memory Fault
Thanks a lot bro,

Please Log in or Create an account to join the conversation.

Time to create page: 0.342 seconds