× Help us help you. By posting the year, make, model and engine near the beginning of your help request, followed by the symptoms (no start, high idle, misfire etc.) Along with any prevalent Diagnostic Trouble Codes, aka DTCs, other forum members will be able to help you get to a solution more quickly and easily!

Main plug full of oil

  • Jose santos
  • Topic Author
  • Offline
  • New Member
  • New Member
More
15 Mar 2020 13:41 #38383 by Jose santos
Main plug full of oil was created by Jose santos
Got a 05 g6 3.5 tap shift transmission with p0753 code 1-2 shift solenoid. When l commanded solenoid on/off with scan tool l heard a crisp clicking sound so no need to check 12v feed n gnd signal from pcm. I pulled the main plugh n was full of transmission fluid assuming it was shorting things out to either ground or batt. My question: is there any possibility the fluid leaked through the back of the plug into it? I cleaned n reconnected it n no more codes or shifting problems at all. Please advise or remove if not allowed.
Thanks

Jose Santos.

Please Log in or Create an account to join the conversation.

  • Tyler
  • Tyler's Avatar
  • Offline
  • Moderator
  • Moderator
  • Letting the magic smoke out since 2011
More
15 Mar 2020 19:31 #38393 by Tyler
Replied by Tyler on topic Main plug full of oil
To be clear, you found fluid inside the female pins of the transmission connector itself? :huh:

Please Log in or Create an account to join the conversation.

  • Not Allowed: to create new topic.
  • Not Allowed: to reply.
  • Not Allowed: to add attachements.
  • Not Allowed: to edit your message.
Time to create page: 0.229 seconds