*** Restricting New Posts to SD Premium Members ONLY *** (09 May 2025)

Just made a new account? Can't post? Click above.

Help us help you. By posting the year, make, model and engine near the beginning of your help request, followed by the symptoms (no start, high idle, misfire etc.) Along with any prevalent Diagnostic Trouble Codes, aka DTCs, other forum members will be able to help you get to a solution more quickly and easily!

1988 Ford F150 5.0

  • autoemt
  • autoemt's Avatar Topic Author
  • Offline
  • New Member
  • New Member
More
5 years 8 months ago #36471 by autoemt
1988 Ford F150 5.0 was created by autoemt
I am trying to find a new knock sensor. would anyone have a Part number for it. I have not been able to find anything yet.
Old sensor broke.

Please Log in or Create an account to join the conversation.

  • Noah
  • Noah's Avatar
  • Offline
  • Moderator
  • Moderator
  • Give code definitions with numbers!
More
5 years 8 months ago #36482 by Noah
Replied by Noah on topic 1988 Ford F150 5.0
m.autozone.com/engine-management/knock-sensor
"Ground cannot be checked with a 10mm socket"

Please Log in or Create an account to join the conversation.

  • autoemt
  • autoemt's Avatar Topic Author
  • Offline
  • New Member
  • New Member
More
5 years 8 months ago #36500 by autoemt
Replied by autoemt on topic 1988 Ford F150 5.0
Thanks I like that "learn apply repeat". What I learned is be careful when removing intake manifold. And knock sensors for that engine are discontinued. And I found one at a junk yard. That is working.

Please Log in or Create an account to join the conversation.

  • Noah
  • Noah's Avatar
  • Offline
  • Moderator
  • Moderator
  • Give code definitions with numbers!
More
5 years 8 months ago #36507 by Noah
Replied by Noah on topic 1988 Ford F150 5.0
Glad you found one! Figured the sensor would still be available. Oh well, you're not the only to break something pulling an intake. Stuff happens.
"Ground cannot be checked with a 10mm socket"

Please Log in or Create an account to join the conversation.

Time to create page: 0.357 seconds