*** Restricting New Posts to SD Premium Members ONLY *** (09 May 2025)

Just made a new account? Can't post? Click above.

Help us help you. By posting the year, make, model and engine near the beginning of your help request, followed by the symptoms (no start, high idle, misfire etc.) Along with any prevalent Diagnostic Trouble Codes, aka DTCs, other forum members will be able to help you get to a solution more quickly and easily!

Relay

  • Jumpercable
  • Jumpercable's Avatar Topic Author
  • Offline
  • New Member
  • New Member
More
5 years 10 months ago #34662 by Jumpercable
Relay was created by Jumpercable
I have 2015 Chrysler town&country van my question is on relays this relay is rectangular is shape do these relay have to have the correct orientation or can they just be put back in place . Edward janiszewski edwardjaniszewski@yahoo.com

Please Log in or Create an account to join the conversation.

  • Chad
  • Chad's Avatar
  • Offline
  • Moderator
  • Moderator
  • I am not a parts changer.
More
5 years 10 months ago #34666 by Chad
Replied by Chad on topic Relay
4-pin relays can be put in either way. The CONTROL terminals are diagonal from each other, as are the LOAD terminals. This allows for either way.
"Knowledge is a weapon. Arm yourself, well, before going to do battle."
"Understanding a question is half an answer."
I have learned more by being wrong, than I have by being right. :-)
The following user(s) said Thank You: Jumpercable

Please Log in or Create an account to join the conversation.

Time to create page: 0.445 seconds