Help us help you. By posting the year, make, model and engine near the beginning of your help request, followed by the symptoms (no start, high idle, misfire etc.) Along with any prevalent Diagnostic Trouble Codes, aka DTCs, other forum members will be able to help you get to a solution more quickly and easily!
2001 accord 3.0 coupe 2 door power window diagram help
- cheryl hartkorn
- Topic Author
- Offline
- Platinum Member
Less
More
- Posts: 692
- Thank you received: 130
4 years 8 months ago #32630
by cheryl hartkorn
all i can find is diagrams for 4 door models. im not getting any power to the power window motor on the passenger side. or unless the 4 door model is the same diagram minus 2 switches?? so if someone can helpme out itd be appreciated
Please Log in or Create an account to join the conversation.
- tim.smith1
- Offline
- Premium Member
Less
More
- Posts: 149
- Thank you received: 61
4 years 8 months ago #32635
by tim.smith1
Replied by tim.smith1 on topic 2001 accord 3.0 coupe 2 door power window diagram help
here is the one for the 2 door
The following user(s) said Thank You: Tyler
Please Log in or Create an account to join the conversation.
- tim.smith1
- Offline
- Premium Member
Less
More
- Posts: 149
- Thank you received: 61
4 years 8 months ago #32636
by tim.smith1
Replied by tim.smith1 on topic 2001 accord 3.0 coupe 2 door power window diagram help
this one is for a 3.0 engine i dont think it matters but just incase lol
Please Log in or Create an account to join the conversation.
4 years 8 months ago #32640
by Cheryl
Replied by Cheryl on topic 2001 accord 3.0 coupe 2 door power window diagram help
So what is this multiplex unit?? I tried reading scan data but the module wasn’t even on the list of modules to communicate with
Please Log in or Create an account to join the conversation.
4 years 8 months ago #32643
by Cheryl
Replied by Cheryl on topic 2001 accord 3.0 coupe 2 door power window diagram help
Also the white red wire that runs from the drivers switch to the passenger switch is supposed to have 12 volts?? I think that’s where my issue is
Please Log in or Create an account to join the conversation.
Time to create page: 0.216 seconds