Help us help you. By posting the year, make, model and engine near the beginning of your help request, followed by the symptoms (no start, high idle, misfire etc.) Along with any prevalent Diagnostic Trouble Codes, aka DTCs, other forum members will be able to help you get to a solution more quickly and easily!
IAC question
Less
More
Posts: 344
Thank you received: 109
4 years 10 months ago - 4 years 10 months ago #30557
by John Curtis
2001 Silverado 1500 4.8l base
Start/stall
Foot on the gas and it was running fine. No throttle and it died. Tapped on the IAC and now it’s performing fine.
Should I recommend the replacement of the IAC at this point even if it’s now working properly?
Making Pressure Differential Sensors (PDA Sensors) for pressure pulse diagnostics.
Currently servicing Central Texas.
Please Log in or Create an account to join the conversation.
Noah
Offline
Moderator
Give code definitions with numbers!
Less
More
Posts: 4416
Thank you received: 959
4 years 10 months ago #30559
by Noah
I would. It's not going to get better over time. Plus, at the end of the day you don't make money not selling service.
"Ground cannot be checked with a 10mm socket"
Please Log in or Create an account to join the conversation.
Time to create page: 0.210 seconds