× Help us help you. By posting the year, make, model and engine near the beginning of your help request, followed by the symptoms (no start, high idle, misfire etc.) Along with any prevalent Diagnostic Trouble Codes, aka DTCs, other forum members will be able to help you get to a solution more quickly and easily!

92 S10 2.8L v6 (manual)/ cranks,no start

  • neuralsnafu
  • Topic Author
  • Offline
  • New Member
  • New Member
08 May 2019 21:03 #29430 by neuralsnafu
92 S10 2.8L v6 (manual)/ cranks,no start was created by neuralsnafu
My s10 got brought home via flatbed this afternoon due to the fact that it will crank, and sometimes try to start, but fails..

So far I get spark at the plug (was able to get the spark to go the length of the boot with a test light), I can see the injectors spraying, and with the air cleaner off I'm sure it was getting plenty of air.

Tools available, laptop based scope, dmm, test light, alldatadie.

I'm greatly annoyed with this truck at the moment, first time it's been on a flatbed since I bought it 2 years ago.

Please Log in or Create an account to join the conversation.

  • Not Allowed: to create new topic.
  • Not Allowed: to reply.
  • Not Allowed: to add attachements.
  • Not Allowed: to edit your message.
Time to create page: 0.419 seconds