Help us help you. By posting the year, make, model and engine near the beginning of your help request, followed by the symptoms (no start, high idle, misfire etc.) Along with any prevalent Diagnostic Trouble Codes, aka DTCs, other forum members will be able to help you get to a solution more quickly and easily!

crankshaft position sensor

  • jzapotocky721
  • jzapotocky721's Avatar Topic Author
  • Offline
  • New Member
  • New Member
  • 223-291-8663
More
3 days 23 minutes ago #92713 by jzapotocky721
crankshaft position sensor was created by jzapotocky721
Does a 1994 Ford Mustang GT 5.0L 2 door coupe have a crankshaft position sensor? Here is the VIN for the car. I have a crank but no start condition. I noticed when I was cranking it, the RPM's didn't move off of Zero.
1FALP42T9RF104462

Please Log in or Create an account to join the conversation.

  • Noah
  • Noah's Avatar
  • Offline
  • Moderator
  • Moderator
  • Give code definitions with numbers!
More
2 days 3 hours ago #92722 by Noah
Replied by Noah on topic crankshaft position sensor
Not exactly, all the ignition inputs are in the distributor.
"Ground cannot be checked with a 10mm socket"

Please Log in or Create an account to join the conversation.

Time to create page: 0.257 seconds