Help us help you. By posting the year, make, model and engine near the beginning of your help request, followed by the symptoms (no start, high idle, misfire etc.) Along with any prevalent Diagnostic Trouble Codes, aka DTCs, other forum members will be able to help you get to a solution more quickly and easily!
2016 Subaru Outback 2.5i Premium 5 v reference irregularity P0122 and P0222
I am posting a scope capture of battery voltage, 5 v reference to the throttle body, and throttle body position sensor 1 data. The irregularity in the 5 v reference threw me way off until I compared it with a known good car and found it looks identical. The irregularity changes with engine rpm, it is happening twice per revolution. Does anyone know the reason for this? 1 picture is scope set to 1 ms per frame and the other picture is zoomed out. I am diagnosing codes P0122 and P0222 in this car. The codes set once and caused the car to go into fail-safe but I have not been able to duplicate.
I suspect that what you are seeing is just noise from coil/ignition events. The more you use a scope, the more you will see this. The more you see it, the easier it will be to ignore it.
"Knowledge is a weapon. Arm yourself, well, before going to do battle."
"Understanding a question is half an answer." I have learned more by being wrong, than I have by being right.