*** Restricting New Posts to SD Premium Members ONLY *** (09 May 2025)

Just made a new account? Can't post? Click above.

Help us help you. By posting the year, make, model and engine near the beginning of your help request, followed by the symptoms (no start, high idle, misfire etc.) Along with any prevalent Diagnostic Trouble Codes, aka DTCs, other forum members will be able to help you get to a solution more quickly and easily!

hall effect cranksensor

  • cyrus.nk
  • cyrus.nk's Avatar Topic Author
  • Offline
  • Senior Member
  • Senior Member
More
8 years 10 months ago #3113 by cyrus.nk
hall effect cranksensor was created by cyrus.nk
Obviously the hall effect crank & cam sensor have 3 wires.power,ground and signal.but yesterday i was working on Chevrolet 2006 no start condition.error code was p1628 but first started by checking cranksensor signals.I found 2.5 on both wires and 1 ground.anyone have seen this before?

Please Log in or Create an account to join the conversation.

  • Noah
  • Noah's Avatar
  • Offline
  • Moderator
  • Moderator
  • Give code definitions with numbers!
More
8 years 10 months ago #3178 by Noah
Replied by Noah on topic hall effect cranksensor
Hi Cyrus!

Did you check for the 5v ref on any of the other sensors?
I think that code refers to a temperature sensor circuit. Just for our information, what kind of Chevrolet and which engine?
"Ground cannot be checked with a 10mm socket"

Please Log in or Create an account to join the conversation.

Time to create page: 0.335 seconds